Electronics Reading Transistor Markings

Previous Page__Next Page

To Alpha. Index    To Manuf. Index    To Category Index    Part No. Index

WEB SPECIALS    NEW PRODUCTS    VIEW CART

To Bottom of Page

Back to Tips Index

Reading Transistor Markings

1. Joint Electron Device Engineering Council (JEDEC)
These part numbers take the form: digit, letter, sequential number, [suffix]

The letter is always 'N', and the first digit is 1 for diodes, 2 for transistors, 3 for four-leaded devices, and so forth. But 4N and 5N are reserved for opto-couplers. The sequential numbers run from 100 to 9999 and indicate the approximate time the device was first made.

If present, a suffix could indicate various things. For example, a 2N2222A is an enhanced version of a 2N2222. It has higher gain, frequency, and voltage ratings. Always check the data sheet.

Examples: 1N914 (diode), 2N2222, 2N2222A, 2N904 (transistors).

NOTE: When a metal-can version of a JEDEC transistor is remade in a plastic package, it is often given a number such as PN2222A which is a 2N2222A in a plastic case.

2. Japanese Industrial Standard (JIS)
These part numbers take the form: digit, two letters, sequential number, [optional suffix]

Digits are 1 for diodes, 2 for transistors, and so forth. The letters indicate the type and intended application of the device according to the following code:

The sequential numbers run from 10-9999. The optional suffix indicates that the type is approved for use by various Japanese organizations. Since the code for transistors always begins with 2S, it is sometimes omitted; for example, a 2SC733 could be marked C733.

Examples: 2SA1187, 2SB646, 2SC733.

3. Pro-Electron (European)
These part numbers take the form: two letters, [letter], sequential number, [suffix]

The first letter indicates the material:
A = Ge
B = Si
C = GaAs
R = compound materials.

The second letter indicates the device type and intended application:
A: diode, RF
B: diode,varactor
C: transistor, AF, small signal
D: transistor, AF, power
E: Tunnel diode
F: transistor, HF, small signal
K: Hall effect device
L: Transistor, HF, power
N: Opto-coupler
P: Radiation sensitive device
Q: Radiation producing device
R: Thyristor, Low power
T: Thyristor, Power
U: Transistor, power, switching
Y: Rectifier
Z: Zener, or voltage regulator diode

Examples: BC108A, BAW68, BF239, BFY51.

Instead of 2N and so forth, some manufacturers use their own system of designations. Some common prefixes are:

MJ: Motorola power, metal case
MJE: Motorola power, plastic case
MPS: Motorola low power, plastic case
MRF: Motorola HF, VHF and microwave transistor
RCA: RCA device
TIP: Texas Instruments (TI) power transistor, plastic case
TIPL: TI planar power transistor
TIS: TI small signal transistor (plastic case)
ZT: Ferranti
ZTX: Ferranti

Examples: ZTX302, TIP31A, MJE3055.

Many manufacturers also make custom parts, or custom-label standard parts, for large volume OEM customers. Typically, they have the OEM's mark or logo and part-number. When such parts hit the surplus market, they end up in hobbyist "bargain packs". Since data on these devices is not usually available, they are best used as LED-drivers and other such applications where the actual specifications are not critical.

To Top Of Page

Back To Tips Index

Our Indexes Product Index Category Index Manufacturer's Index Part Number Index Web Only Products New Products Index

Subscribe to the Electronix Express Newsletter (Filled with the latest news and information about the electronics industry. This Newsletter may also contain special discounts not available anywhere else) Email: electron@elexp.com - General Questions and Comments technical@elexp.com - Technical Questions

Copyright © 1996-2008 Electronix Express
A Division of R.S.R. Electronics, Inc.
365 Blair Road
Avenel, New Jersey 07001
Phone 1-800-972-2225 (In NJ 1-732-381-8020)
Fax 1-732-381-1006; 1-732-381-1572
Last Modified December 3, 2001