Due to launching our new website, you must reset your password using our reset password option. If you have any issues, please email us at wmaster at elexp.com or call us on 800-972-2225 x101.

Dual H-Bridge Motor Controller Module

Dual H-Bridge Motor Controller Module

Starting with Arduino™ UNO Kit

Starting with Arduino™ UNO Kit

RasWIK - Raspberry Pi Wireless Inventors Kit


The Wireless Inventors Kit for the Raspberry Pi (RasWIK) is an exciting and affordable addition to the Raspberry Pi. RasWIK demonstrates that with our leading edge technology anyone (and we mean anyone) can build wireless sensors and actuators, you do not need huge experience, a degree or even any tools. We show you even how to connect the devices you build to �the Internet of Things� (IoT) service providers such as Xively.

Getting started is just 5 simple steps:

  • Insert the preconfigured SD card to your Pi
  • Plug in the Slice of Radio to the GPIO connector
  • Turn on the Pi
  • Power the XinoRF development board
  • Lauch the Python based example application on your Pi
  • Thats it!........you are now past step one of your journey to wireless nirvana :)

You can build wireless devices in just a matter of minutes. All the code is fully Open Source, you can use, modify and even sell your own products based on this kit.

There are 29 fully documented projects. The 17 hardware projects take you from very basic sensors, actuators and light controls to more complicated ones that include measuring temperature and light levels. The 12 fully completed software projects show you how to do more sophisticated stuff, including posting your measurements on the Internet.

Out of the box all the hardware is configured to start you off without you writing a single line of code. The kit comes complete with an SD card image that has starter software and a fully configured Pi operating system already installed. The devices you make are even interoperable with our off the shelf wireless devices.


  • Starter examples require no soldering
  • Comes with plug in wires and a solderless breadboard
  • 4Gb SD card image (saves you lots of Pi configuration)
  • Examples use LLAP to drive the devices (LLAP devices can be mixed with our out the box wireless devices)
  • Made in the UK

Pack List

  • 1 x Ciseco Slice of Radio
  • 1 x Ciseco XinoRF development board
  • 1 x 4Gb SD card with Pi OS and sample software
  • 1 x USB cable
  • 1 x Small breadboard
  • 5 x Red LED
  • 5 x Yellow LED
  • 5 x Green LED
  • 1 x Blue LED
  • 1 x Transistor
  • 1 x Diode
  • 1 x Variable resistor (potentiometer)
  • 10 x 10K Resistor
  • 20 x 470R Resistor
  • 1 x Light Dependant Resistor (light sensor)
  • 1 x Thermistor (temperature sensor)
  • 1 x Piezo sounder
  • 3 x Push buttons
  • 25 x Jump wire (assorted colors)
  • Length of hook up wire
Write Your Own Review
You're reviewing:RasWIK - Raspberry Pi Wireless Inventors Kit
Your Rating
RasWIK Raspbry Pi Wireless KIT

  WARNING: This product can expose you to chemicals including DEHP which is known to the State of California to cause cancer and to cause birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov