The Amprobe 15XP-B is the right choice for electronics engineers and field service technicians, featuring TTL logic test for digital circuits, diode test for component level troubleshooting, a special 2000 MΩ measurement range, and an integrated tilt stand for convenience on the bench.
Features:
- Designed for electronics engineers, technicians and field service
- Autoranging display for faster measurements
- TTL logic test for digital circuits
- Integrated tilt stand for easy bench use
- Diode test for component level troubleshooting
- Data hold freezes display to “hold” measurement reading
- 600 V AC / 600 V DC-highest voltage rating in this size of meter
- Special 2000 MΩ measurement range
Specifications:
- DC Voltage: 200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V
- AC Voltage: 200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V
- Current AC/DC: 200.0 µA, 2.000 mA, 20.00 mA, 200.0 mA, 2 A
- Resistance: 200.0 Ω, 2.000 kΩ, 20.00 kΩ, 200.0 kΩ, 2.000 MΩ, 20.00 MΩ, 2000 MΩ
- VolTect™ Non-Contact Voltage Detection: 70 V AC → 600 V AC (50 Hz → 60 Hz)
- Logic test: TTL, 20 MHz
- Display: 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
- Polarity: Automatic, positive implied, negative polarity indication
- Over-range: (OL) or (-OL) is displayed
- Zero: Automatic
- Low battery indication: The + is displayed when the battery voltage drops below the operating level
- Auto power off: Approx. 10 minutes
- Measurement rate: 2 times per second, nominal
- Operating environment: 0 °C to 50 °C at <70 % R.H.
- Accuracy: Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
- Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
- DC Volt ranges: 200 mV, 2 V, 20 V, 200 V, 600 V
- Accuracy: ± (0.5 % rdg + 1 dgt)
- AC Volts: (45 Hz to 500 Hz) ranges 200 mV 2 V, 20 V, 200 V, 600 V
- Accuracy: ± (1.5 % rdg + 5 dgts)
- DC Current ranges: 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.0 % rdg + 2 dgt) 2 A, Accuracy ± (2.0 % rdg + 3 dgts)
- AC Current: (45 Hz to 500 Hz) ranges 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy ± (1.5 % rdg + 5 dgts) 2 A, Accuracy ± (2.5 % rdg + 5 dgts)
- Resistance: 200 Ω , 2 kΩ , 20 kΩ , 200 kΩ , 2 MΩ ± (1.0 % rdg + 4 dgts)
- Resistance: 2000 MO ± {5.0 % (rdg -10 dgts) +20 dgt}
- Continuity audible indication: Less than 25 Ω
- Diode test current: 1.2 mA (approximate) ±(1.5 % rdg + 3 dgts)
- Logic test: TTL
- Non-contact voltage indicator: Sense voltage 70 V to 600 V AC (50 Hz to 60 Hz) beeper chirps and big bright red LED comes on, works on all ranges