Estes Saturn 1B; 1:100 (Master Skill Level)

SKU: 78TE7251

  • Sale
  • Regular price $69.99

The Estes Saturn 1B SA-206 is a stunning 1:100 scale recreation of the Saturn 1B and Apollo spacecraft stack as it appeared in 1973 for the launch of the first Skylab crew. Every detail is there, from the Launch Escape System atop the Apollo Command and Service Module, to the first-stage H-1 engine nozzles (remove for launch). Textured body wraps, injection molded components, and other plastic formed parts add a level of realism to this Master-Level kit that every scale modeler will appreciate. Launch your finished model using one of the recommended Estes engines for a spectacular liftoff and dazzling two-piece recovery under dual parachutes. On display or in the air, the Estes Saturn 1B is a marvelous addition to any fleet.

WHAT YOU NEED TO BUILD: Pencil, #220 #320 #400 and #600 sandpaper, ca, ca accelerator, epoxy, yellow glue, tube-type plastic cement, liquid plastic cement, putty for plastic models, sanding sealer, tweezers, hobby knife, sharp blades, masking tape, permanent spray adhesive (not artists’ or repositionable), paint (flat black, flat white, silver). (Tools, construction and finishing supplies not included.)


  • Recommended Engines
    • C11-3, D12-3, E12-4, E12-6
  • Projected Max Altitude
    • 1000 ft. (305 m)
  • Recovery System
    • 1x 15 in. (38.1 cm) Parachute
    • 1x 18 in. (45.7 cm) Parachute
  • Length
    • 26.8 in. (68.1 cm)
  • Diameter
    • 2.62 in. (67 mm)
  • Estimated Weight
    • 6.9 oz. (196 g)
  • Estimated Assembly Time
    • 10 Hours (painting and glue drying time not included)
  • Fin Materials
    • Injection molded plastic
  • Decal Type
    • Waterslide
  • Launch System
    • E Launch Pad and Pro Series II Launch Controller
  • Launch Rod Size
    • 3/16" Maxi Rod (sold separately)
  • Age Recommendation
    • Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages.