This high impedance oscilloscope probe is designed and calibrated for use with instruments having an input impedance of 1M ohm shunted by 20pF; however, it may be compensated for use with instruments having an input capacitance of 10 to 30pF. The probe incorporates a three position slide switch in the head which selects attenuation of x1, x10, or a ground reference position.
- BNC to IC Test Hook, with selectable X1 (Bandwidth DC to 6MHz), X10 (Bandwidth DC to 60MHz) switch
- Includes probe, spring hook, ground lead, insulating tip, measuring tip, IC tip, adjusting tool, and channel identifier clips
- The probe incorporates a three position slide switch in the head which selects attenuation of x1, x10, or a ground reference position
- Designed and calibrated for use with instruments having an input impedance of 1M ohm shunted by 20pF; however, it may be compensated for use with instruments having an input capacitance of 10 to 30pF
- Meets EN61010-031 CAT II safety requirements
Includes:
- Probe
- Spring hook
- Ground lead
- Measuring tip
- IC tip
- Adjusting tool
- Channel identifier clips